MOTO GUZZI V85 TT Service Station Manual page 180

Braking system
•
Insert the two screws (6) and tighten
them
Removal
•
Connect the bleeder bottles to the cal-
liper bleeder screw and open
•
Press the lever down as far as it will go
and block it in position using a clamp-
ing device in order to prevent the liquid
from escaping from the system when it
is open.
•
Close the calliper bleeder screw and
remove the bleeder bottle.
•
Loosen the two grub screws (1)
•
Free the brake calliper line from the ca-
ble grommet (2)
•
Unscrew and remove the two screws
(3)
BRAK SYS - 180
V85 TT