Sbus<N>:Manchester:trigger:pattern:value:data - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

31
:SBUS<n> Commands
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA
Command Syntax
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1 | X | $}
<string ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X | $}
When the VALue trigger mode is selected (:SBUS<n>:MANChester:TRIGger), the
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA command specifies the
value to trigger on.
Note that the trigger value bit order is always for bits as they arrive (that is, MSB
first) regardless of the serial decode bit order setting (in
:SBUS<n>:MANChester:BITorder).
The bit width (length) of the value is set with the
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:WIDTh command.
Query Syntax
:SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA?
The :SBUS<n>:MANChester:TRIGger:PATTern:VALue:DATA? query returns the
specified trigger value as a string of binary digits.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 | 1 | X | $}
See Also •
•
•
1014
(see page 1610)
":SBUS<n>:MANChester:BITorder"
":SBUS<n>:MANChester:TRIGger"
":SBUS<n>:MANChester:TRIGger:PATTern:VALue:WIDTh"
on page 1003
on page 1013
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 1015