Trigger:transition:qualifier - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

35
:TRIGger Commands

:TRIGger:TRANsition:QUALifier

Command Syntax
:TRIGger:TRANsition:QUALifier <qualifier>
<qualifier> ::= {GREaterthan | LESSthan}
The :TRIGger:TRANsition:QUALifier command specifies whether you are looking for
rise/fall times greater than or less than a certain time value. The time value is set
using the :TRIGger:TRANsition:TIME command.
Query Syntax
:TRIGger:TRANsition:QUALifier?
The :TRIGger:TRANsition:QUALifier? query returns the current rise/fall time trigger
qualifier setting.
Return Format
<qualifier><NL>
<qualifier> ::= {GRE | LESS}
See Also •
•
•
1372
(see page 1610)
"Introduction to :TRIGger Commands"
":TRIGger:TRANsition:TIME"
":TRIGger:MODE" on page 1308
on page 1295
on page 1375
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide