Sbus<N>:A429:Trigger:pattern:sdi - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

31
:SBUS<n> Commands
:SBUS<n>:A429:TRIGger:PATTern:SDI
Command Syntax
:SBUS<n>:A429:TRIGger:PATTern:SDI <string>
<string> ::= "nn" where n ::= {0 | 1 | X}, length always 2 bits
The :SBUS<n>:A429:TRIGger:PATTern:SDI command defines the ARINC 429
two-bit SDI pattern resource according to the string parameter. This pattern
controls the SDI pattern searched for in each ARINC 429 word.
The specified SDI is only used if the :SBUS<n>:A429:FORMat includes the SDI
field.
Query Syntax
:SBUS<n>:A429:TRIGger:PATTern:SDI?
The :SBUS<n>:A429:TRIGger:PATTern:SDI? query returns the current settings of
the specified ARINC 429 two-bit SDI pattern resource in the binary string format.
Return Format
<string><NL> in nondecimal format
Errors •
See Also •
•
•
•
•
872
(see page 1610)
"-241, Hardware missing"
"Introduction to :TRIGger Commands"
":SBUS<n>:A429:FORMat"
":SBUS<n>:A429:TRIGger:TYPE"
":SBUS<n>:A429:TRIGger:PATTern:DATA"
":SBUS<n>:A429:TRIGger:PATTern:SSM"
on page 1551
on page 1295
on page 866
on page 875
on page 871
on page 873
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide