Wmemory<R>:Save - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

38
:WMEMory<r> Commands
:WMEMory<r>:SAVE
Command Syntax
:WMEMory<r>:SAVE <source>
<r> ::= 1 to (# ref waveforms) in NR1 format
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
The :WMEMory<r>:SAVE command copies the analog channel or math function
waveform to the specified reference waveform location.
Math functions whose x-axis is not frequency can be saved as reference waveforms.
N OTE
See Also •
•
1486
(see page 1610)
Chapter 38, ":WMEMory<r> Commands," starting on page 1481
":WMEMory<r>:DISPlay" on page 1484
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide