Power:harmonics:standard - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

28
:POWer Commands

:POWer:HARMonics:STANdard

Command Syntax
:POWer:HARMonics:STANdard <class>
<class> ::= {A | B | C | D}
The :POWer:HARMonics:STANdard command selects the standard to perform
current harmonics compliance testing on.
• A — IEC 61000-3-2 Class A — for balanced three-phase equipment, household
• B — IEC 61000-3-2 Class B — for portable tools.
• C — IEC 61000-3-2 Class C — for lighting equipment.
• D — IEC 61000-3-2 Class D — for equipment having a specified power
Query Syntax
:POWer:HARMonics:STANdard?
The :POWer:HARMonics:STANdard query returns the currently set IEC 61000-3-2
standard.
Return Format
<class><NL>
<class> ::= {A | B | C | D}
See Also •
•
•
•
•
•
•
•
•
744
(see page 1610)
appliances (except equipment identified as Class D), tools excluding portable
tools, dimmers for incandescent lamps, and audio equipment.
according less than or equal to 600 W, of the following types: personal
computers and personal computer monitors, television receivers.
":POWer:HARMonics:APPLy"
":POWer:HARMonics:DATA"
":POWer:HARMonics:DISPlay"
":POWer:HARMonics:FAILcount"
":POWer:HARMonics:LINE"
":POWer:HARMonics:POWerfactor"
":POWer:HARMonics:RUNCount"
":POWer:HARMonics:STATus"
":POWer:HARMonics:THD"
on page 735
on page 736
on page 737
on page 738
on page 739
on page 740
on page 743
on page 745
on page 746
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide