Power:clresponse:source:output - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

28
:POWer Commands

:POWer:CLResponse:SOURce:OUTPut

Command Syntax
:POWer:CLResponse:SOURce:OUTPut <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :POWer:CLResponse:SOURce:OUTPut command selects the oscilloscope
channel that is probing the power supply output.
Query Syntax
:POWer:CLResponse:SOURce:OUTPut?
The :POWer:CLResponse:SOURce:OUTPut? query returns the channel selection.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also •
•
•
•
•
•
•
•
•
•
•
726
(see page 1610)
":POWer:CLResponse"
":POWer:CLResponse:APPLy"
":POWer:CLResponse:DATA"
":POWer:CLResponse:FREQuency:MODE"
":POWer:CLResponse:FREQuency:STARt"
":POWer:CLResponse:FREQuency:STOP"
":POWer:CLResponse:PPDecade"
":POWer:CLResponse:SOURce:INPut"
":POWer:CLResponse:WGEN:LOAD"
":POWer:CLResponse:WGEN:VOLTage"
":POWer:CLResponse:WGEN:VOLTage:PROFile"
on page 713
on page 714
on page 715
on page 720
on page 722
on page 723
on page 724
on page 725
on page 728
on page 729
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 730