Sbus<N>:Lin:display - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

31
:SBUS<n> Commands
:SBUS<n>:LIN:DISPlay
(see page 1610)
Command Syntax
:SBUS<n>:LIN:DISPlay <type>
<type> ::= {HEXadecimal | SYMBolic}
The :SBUS<n>:LIN:DISPlay command specifies, when LIN symbolic data is loaded
into the oscilloscope, whether symbolic values (from the LDF file) or hexadecimal
values are displayed in the decode waveform and the Lister window.
Query Syntax
:SBUS<n>:LIN:DISPlay?
The :SBUS<n>:LIN:DISPlay? query returns the LIN decode display type.
Return Format
<type><NL>
<type> ::= {HEX | SYMB}
See Also • ":RECall:LDF[:STARt]" on page 815
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 975