Display:connect - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

39
Obsolete and Discontinued Commands

:DISPlay:CONNect

Command Syntax
:DISPlay:CONNect <connect>
<connect> ::= {{ 1 | ON} | {0 | OFF}}
The :DISPlay:CONNect command turns vectors on and off. When vectors are
turned on, the oscilloscope displays lines connecting sampled data points. When
vectors are turned off, only the sampled data is displayed.
The :DISPlay:CONNect command is an obsolete command provided for compatibility to
N OTE
previous oscilloscopes. Use the :DISPlay:VECTors command (see
Query Syntax
:DISPlay:CONNect?
The :DISPlay:CONNect? query returns the current state of the vectors setting.
Return Format
<connect><NL>
<connect> ::= {1 | 0}
See Also •
1504
(see page 1610)
":DISPlay:VECTors" on page 425
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
page 425) instead.