Mtest:rmode:faction:print - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

26
:MTESt Commands

:MTESt:RMODe:FACTion:PRINt

Command Syntax
:MTESt:RMODe:FACTion:PRINt <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :MTESt:RMODe:FACTion:PRINt command sets printing on mask failures on or
off.
Setting :MTESt:RMODe:FACTion:PRINt ON automatically sets :MTESt:RMODe:FACTion:SAVE
N OTE
OFF.
See
information on setting the hardcopy device and formatting options.
Query Syntax
:MTESt:RMODe:FACTion:PRINt?
The :MTESt:RMODe:FACTion:PRINt? query returns the current mask failure print
setting.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also •
•
•
•
686
(see page 1610)
Chapter 21, ":HARDcopy/:HCOPY Commands," starting on page 503 for more
"Introduction to :MTESt Commands"
":MTESt:RMODe:FACTion:MEASure"
":MTESt:RMODe:FACTion:SAVE"
":MTESt:RMODe:FACTion:STOP"
on page 667
on page 685
on page 687
on page 688
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide