Trigger:glitch:qualifier - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

35
:TRIGger Commands

:TRIGger:GLITch:QUALifier

Command Syntax
:TRIGger:GLITch:QUALifier <operator>
<operator> ::= {GREaterthan | LESSthan | RANGe}
This command sets the mode of operation of the glitch pulse width trigger. The
oscilloscope can trigger on a pulse width that is greater than a time value, less
than a time value, or within a range of time values.
Query Syntax
:TRIGger:GLITch:QUALifier?
The :TRIGger:GLITch:QUALifier? query returns the glitch pulse width qualifier.
Return Format
<operator><NL>
<operator> ::= {GRE | LESS | RANG}
See Also •
•
•
1336
(see page 1610)
"Introduction to :TRIGger Commands"
":TRIGger:GLITch:SOURce"
":TRIGger:MODE" on page 1308
on page 1295
on page 1338
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide