Trigger:nfc:standard - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

35
:TRIGger Commands

:TRIGger:NFC:STANdard

Command Syntax
:TRIGger:NFC:STANdard <standard>
<standard> ::= {{A | A106} | {B | B106} | F212 | F424}
The :TRIGger:NFC:STANdard command selects the signaling technology used by
the input signal:
• A or A106 — NFC-A standard, 106 kbits/s.
• B or B106 — NFC-A standard, 106 kbits/s.
• F212 — NFC-F standard, 212 kbits/s.
• F424 — NFC-F standard, 424 kbits/s.
Query Syntax
:TRIGger:NFC:STANdard?
The :TRIGger:NFC:STANdard? query returns the signaling technology setting.
Return Format
<standard><NL>
<standard> ::= {{A | A106} | {B | B106} | F212 | F424}
See Also •
•
•
•
•
•
•
•
1344
(see page 1610)
":TRIGger:NFC:AEVent"
":TRIGger:NFC:ATTime"
":TRIGger:NFC:RPOLarity"
":TRIGger:NFC:SOURce"
":TRIGger:NFC:TEVent"
":TRIGger:NFC:TIMeout"
":TRIGger:NFC:TIMeout:ENABle"
":TRIGger:NFC:TIMeout:TIME"
on page 1340
on page 1341
on page 1342
on page 1343
on page 1345
on page 1347
on page 1348
on page 1349
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide