Search:serial:spi:pattern:data - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

:SEARch:SERial:SPI:PATTern:DATA

Command Syntax
:SEARch:SERial:SPI:PATTern:DATA <string>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
The :SEARch:SERial:SPI:PATTern:DATA command specifies the data value when
searching for SPI events.
The width of the data value is specified using the
:SEARch:SERial:SPI:PATTern:WIDTh command.
Query Syntax
:SEARch:SERial:SPI:PATTern:DATA?
The :SEARch:SERial:SPI:PATTern:DATA? query returns the current data value
setting.
Return Format
<string><NL>
<string> ::= "0xnn...n" where n ::= {0,..,9 | A,..,F | X}
See Also •
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1610)
Chapter 32, ":SEARch Commands," starting on page 1149
":SEARch:SERial:SPI:PATTern:WIDTh"
:SEARch Commands
on page 1236
32
1235