Sbus<N>:M1553:Source - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

:SBUS<n>:M1553:SOURce
Command Syntax
:SBUS<n>:M1553:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:M1553:SOURce command sets the source of the MIL-STD 1553
signal.
Use the :TRIGger:LEVel:HIGH and :TRIGger:LEVel:LOW commands to set the
threshold levels for the selected source.
Query Syntax
:SBUS<n>:M1553:TRIGger:SOURce?
The :SBUS<n>:M1553:SOURce? query returns the currently set source of the
MIL-STD 1553 signal.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
<n> ::= 1 to (# analog channels) in NR1 format
See Also •
•
•
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1610)
":TRIGger:LEVel:HIGH"
":TRIGger:LEVel:LOW"
":TRIGger:MODE" on page 1308
"Introduction to :TRIGger Commands"
on page 1306
on page 1307
on page 1295
31
:SBUS<n> Commands
995