Save:multi[:Start] - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

:SAVE:MULTi[:STARt]

Command Syntax
:SAVE:MULTi[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:MULTi[:STARt] command saves multi-channel waveform data to a file.
This file can be opened by the N8900A Infiniium Offline oscilloscope analysis
software.
If a file extension is provided as part of a specified <file_name>, it must be ".h5".
N OTE
See Also •
•
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1610)
"Introduction to :SAVE Commands"
":SAVE:FILename" on page 827
":SAVE:PWD" on page 837
on page 824
30
:SAVE Commands
835