Sbus<N>:Iic[:Source]:Clock - Keysight Technologies InfiniiVision 4000 X Series Programmer's Manual

:SBUS<n>:IIC[:SOURce]:CLOCk
Command Syntax
:SBUS<n>:IIC[:SOURce]:CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:IIC[:SOURce]:CLOCk command sets the source for the IIC serial
clock (SCL).
Query Syntax
:SBUS<n>:IIC[:SOURce]:CLOCk?
The :SBUS<n>:IIC[:SOURce]:CLOCk? query returns the current source for the IIC
serial clock.
Return Format
<source><NL>
See Also •
•
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1610)
"Introduction to :TRIGger Commands"
":SBUS<n>:IIC[:SOURce]:DATA"
on page 1295
on page 966
31
:SBUS<n> Commands
965