Operate To Position Via Push Buttons Of The Local Controls - AUMA AC 01.2 Manual

Actuator controls
AC 01.2/ACExC 01.2
8.9.7.

Operate to position via push buttons of the local controls

Position 3 = 90.0
Position 4 = 135.0
Position 5 = 180.0
Position 6 = 225.0
Position 7 = 270.0
Position 8 = 315.0
To operate to a position via push buttons of the local controls, status indication S0017
must be shown (refer to <Indications in the display>).
Figure 48: Status indication of multiport valve (selector switch in position OFF)
Operation in clockwise or counterclockwise direction:
When changing the selector switch to position Local control (LOCAL), the display
changes:
Figure 49: Status indication of multiport valve (selector switch in position LOCAL)
As a consequence, the valve can be operated into clockwise or counterclockwise
direction (display shows CW or CCW)
Direct operation to a position:
When selector switch is in position 0 (OFF), the function "Direct operation to a position
via push buttons" is activated via Details (push button
Figure 50: Status indication of multiport valve (selector switch in position OFF)
When changing the selector switch to position Local control (LOCAL), the display
changes for selection of the desired position:
Figure 51: Status indication of multiport valve (selector switch in position LOCAL)
Select the desired position (P1, P2, ...) via push buttons
via Ok (push button ).
→ The operation is issued as soon as push button Ok is pressed.
Application functions
) (display shows Esc).
and confirm selection
71