Process Controller Activation; Process Controller: Set Modulating Behaviour - AUMA AC 01.2 Manual

Application functions
Application
8.5.1.

Process controller activation

Function not active
Function active
8.5.2.

Process controller: set modulating behaviour

56
Figure 40: Process controller function
[1] AC actuator controls
[2] Process controller
[3] Positioner
[4] Actuator
[5] Position transmitter e.g. EWG/RWG/MWG
[6] Sensor
[7] Valve
E1 Position setpoint (internal)
E2 Actual position value
E4 Actual process value
E7 Process setpoint
The process controller can be used to control pressure, flow or flow rates, flow levels
and temperature.
Required user level: Specialist (4) or higher.
Device configuration M0053
Application functions M0178
Activation M0212
Process controller M0741
Default value: Function not active
Setting values:
<Process controller> function deactivated.
<Process controller> function activated.
Three controller types are available to ideally adapt the modulating behaviour of the
process controller to the respective application.
Actuator controls
AC 01.2/ACExC 01.2