Operating Times: Display; Device Temperatures: Display - AUMA AC 01.2 Manual

Plant Asset Management
14.6.

Operating times: display

Characteristics
Application
Operating time CLOSE
Operating time OPEN
14.7.

Device temperatures: display

Temp. controls
Temp. control unit
124
Required user level: Service (5) or higher.
Maintenance signals M1231
Maintenance M1644
Limit starts OPEN M1645
Limit starts CLOSE M1646
Limit turns OPEN M1647
Limit turns CLOSE M1648
The actuator controls automatically determine the operating time for an operation
between two end positions. For both directions (from OPEN to CLOSE and from
CLOSE to OPEN), the last determined value is saved within a parameter.
Operating time measurement indicated how an actuator installed in plant or a
combination of actuator/gearbox/valve behave with regard to inertia without performing
an operation and measuring the time manually.
Display measured operating times
Asset Management M1231
Operating time M1232
Operating time CLOSE M1234
Operating time OPEN M1235
Indications:
Indicates the measured operating time for the last operation in direction CLOSE
Indicates the measured operating time for the last operation in direction OPEN
Required user level: Specialist (4) or higher.
Asset Management M1231
Device status M0592
Device temperatures M0524
Indications:
Indication of current temperature in controls housing
Indication of current temperature in control unit of the actuator (actuator housing)
Actuator controls
AC 01.2/ACExC 01.2