Automatic Address Detection Execution Timing - Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual

Automatic address detection execution timing

The following shows automatic address detection execution timing.
Turning on 'Automatic address detection command' (Y1)
(or long press of the SET switch)
'Automatic address detection flag' (X14)
SET LED
'Overlap address inspection flag' (X15)
'Parameter access completion flag' (X11)
'Parameter access error' (X12)
*1 After turning on 'Automatic address detection command' (Y1), check that 'Automatic address detection flag' (X14) is on or check the SET
LED status. Then, turn off 'Automatic address detection command' (Y1) with a program.
2 PARAMETER SETTINGS
60
2.6 Automatic Address Detection Function
ON
*1
OFF
Automatic
ON
OFF
Automatic
The LED on
OFF
ID search
OFF
ON
A parameter access
error has occurred.
OFF
Automatic address detection
being executed
The LED flashing
(Address being written)
Overlap inspection + parameter read
ON
In process
Automatic
OFF
Automatic
Batch read
executed
ON
Automatic