Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 58

■Mixed assignment by 2-point bit slave module and 1-point bit slave module
When 0, 2, and 3 are set for the input slave module address, and 0, 2, and 3 for the output slave module address, bits are
occupied as follows.
• Buffer memory address of the input slave module
Buffer memory address
Un\G0
Areas occupied by address 0 of the 2-point slave module: Un\G0.0, Un\G0.1
Area occupied by address 2 of the 1-point slave module: Un\G0.2
Areas occupied by address 3 of the 2-point slave module: Un\G0.3, Un\G0.4
• Buffer memory address of the output slave module
Buffer memory address
Un\G4096
Areas occupied by address 0 of the 2-point slave module: Un\G4096.0, Un\G4096.1
Area occupied by address 2 of the 1-point slave module: Un\G4096.2
Areas occupied by address 3 of the 2-point slave module: Un\G4096.3, Un\G4096.4
■Assignment by 2-word word slave module only
When 0 is set for the input slave module address, and 0 and 2 for the output slave module address, words are occupied as
follows.
• Buffer memory address of the input slave module
Buffer memory address
Un\G512
Un\G513
Un\G514
Un\G515
Un\G516
Areas occupied by address 0 of the 2-word slave module: Un\G512, Un\G513
• Buffer memory address of the output slave module
Buffer memory address
Un\G4608
Un\G4609
Un\G4610
Un\G4611
Un\G4612
Areas occupied by address 0 of the 2-word slave module: Un\G4608, Un\G4609
Areas occupied by address 2 of the 2-word slave module: Un\G4610, Un\G4611
Values are correctly stored in the buffer memory only when the number of points is set to 8 words (4 input words/4 output
words) or larger.
2 PARAMETER SETTINGS
56
2.5 Slave Module Address Setting
Bit No.
15 14 13 12 11
15 14 13 12 11
Bit No.
15 14 13 12 11
15 14 13 12 11
10 9 8 7 6
10 9 8 7 6
10 9 8 7 6
10 9 8 7 6
Word No.
0
1
2
3
4
Word No.
0
1
2
3
4
5 4 3 2 1
5 4 3 2 1
5 4 3 2 1
5 4 3 2 1
0
0
0
0