Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 90

Output signal
Device No.
Y0
Y1
Y2
Y3 to YC
YD
YE to YF
Y10
Y11
Y12
Y13 to Y1F
*1 This signal is usable on the RJ51AW12AL of which first two digits of the production information are "03" or later.
Do not use (turn on) any "use prohibited" signals as an input or output signal to the CPU module.
Doing so may cause malfunction of the programmable controller system.
APPX
88
Appendix 2 I/O Signals
Signal name
Error flag clear command
Automatic address detection command
Overlap address inspection command
Use prohibited
AnyWireASLINK version compatibility inspection command
Use prohibited
Parameter access request command for the slave module
Parameter batch read command for the slave module
Parameter batch write command for the slave module
Use prohibited
*1