Mitsubishi Electric MELSEC iQ-R AnyWireASLINK User Manual page 87

Operation
Event code Overview
24000 Error flag clear command
24001 Automatic address detection command
24002 Overlap address inspection command
24010 Parameter access request command for the slave module
24011 Parameter batch read command for the slave module
24012 Parameter batch write command for the slave module
Cause
Error flag clear command was turned off and on.
Automatic address detection command was turned off and on.
Overlap address inspection command was turned off and on.
Parameter access request command for the slave module was turned off
and on.
Parameter batch read command for the slave module was turned off and
on.
Parameter batch write command for the slave module was turned off and
on.
4 TROUBLESHOOTING
4.5 Event List
4
85