Appendix: Electromagnetic Emission And Immunity - Dentsply Sirona X-Smart Plus User Manual

Appendix: Electromagnetic Emission and Immunity

The device complies with all the requirements of both IEC 60601-1-
2:2014 (4
WARNING
• The use of parts other than those supplied or listed as accessory
may negatively affect EMC performance.
• Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should be used
no closer than 30 cm (12 inches) to any part of the device,
including cables. Otherwise, degradation of the performance of
this equipment could result.
The device is intended for use in the environments specified in Chapter
6 Step-by-Step Instructions
electromagnetic environment specified below.
Guidance and manufacturer's declaration - electromagnetic emissions
Emission test
RF Emissions
CISPR 11
RF Emissions
CISPR 11
Harmonic
Emissions
IEC 61000-3-2
Voltage
fluctuations /
flicker emissions
IEC 61000-3-3
BENXSPSDFUWEB / Rev.09 / 10-2018
th
Edition) and of the legacy IEC 60601-1-2:2007 (3
Conformity
Group 1
Class B
Class A
Complies
and Basic Safety is maintained in the
Electromagnetic environment - guidance
The device uses RF energy only for its internal
function.
Therefore, its RF emissions are very low and
are not likely to cause any interference in
nearby electronic equipment.
The device is suitable for use in all
establishments, including domestic
establishments and those directly connected to
the public low-voltage power supply network
that supplies buildings used for domestic
purposes.
rd
Edition).
55/60