Step-by-Step Instructions
6.5.2
Connecting and Disconnecting the Motor Handpiece
Connecting
Align the
(B - see
locks.
Disconnecting
Hold the plug ring and pull it out. Do not twist in any direction.
6.5.3
Connecting and Disconnecting the Contra-angle
Connecting
The contra-angle can be connected at 6 adjustable head positions.
Align the positioning pins of the contra-angle with the positioning slots
of the motor handpiece and insert the head until it clicks (see
Disconnecting
When removing the contra-angle, pull it straight out (see
CAUTION
•
When attaching and detaching the contra-angle, turn the power off
beforehand.
•
Check that the contra-angle is securely assembled to the motor
handpiece.
BENXSPSDFUWEB / Rev.09 / 10-2018
mark of the cord plug with the ▲ mark of the unit connector
Fig.
4) at the left side of the device and insert the plug until it
Contra-angle
Motor handpiece
Fig. 5
Fig.
5).
Fig.
5).
21/60