Warnings
•
In order to avoid possible risks due to electromagnetic interference,
do not use any electrical medical device or electrical device of any
other kind in close proximity to the X-Smart
electromagnetic radiation emitted by the device is below the
recommended limits set forth in pertinent regulations in force
(EN 60601-1-2).
•
Do not use the device in the presence of free oxygen or anesthetic
substances or flammable products.
•
The device may possibly malfunction if used in the presence of an
electromagnetic interference wave. Do not install the
X-Smart
waves.
•
The use of accessories, transducers and cables other than those
specified, with the exception of transducers and cables sold by the
manufacturer of the X-Smart
internal components, may result in increased emissions or
decreased immunity of the X-Smart
•
X-Smart
other equipment. In the instance that if adjacent or stacked use is
necessary, the X-Smart
operation in the configuration in which it will be used.
•
None of the X-Smart
or sterilized: components such as control unit, micromotor and
micromotor cable need to be disinfected, the contra-angle needs to
be sterilized prior to first use and in between each patient!
•
Never place the motor handpiece or any other device accessories
in an autoclave unit or ultrasonic tank.
•
None of the components of the X-Smart
(contra-angle excluded, see chapter
and
•
Do not immerse the device in ultrasonic cleaners.
8/60
®
Plus in the vicinity of any device that emits magnetic
®
Plus should not be used adjacent to or stacked with
®
Sterilization).
®
Plus as replacement parts for
®
Plus.
®
Plus should be observed to verify normal
Plus components are delivered disinfected
6.12 Cleaning, Disinfection
BENXSPSDFUWEB / Rev.09 / 10-2018
®
Plus. The
®
Plus may be sterilized