Dentsply Sirona X-Smart Plus User Manual page 51

Troubleshooting
Problem
The AC adapter does
not work.The CHRG
lamp does not light.
®
Plus
X-Smart motor handpiece
Problem
The motor handpiece
does not rotate.
The motor handpiece
does not rotate. (The
error code "E-01" is
displayed).
The motor handpiece
does not rotate.
(" " and the
rotation speed are
displayed alternately).
BENXSPSDFUWEB / Rev.09 / 10-2018
Cause
The temperature of the
battery is low.
The temperature of the
battery is high.
An error code is displayed.
Cause
The motor handpiece cord is
not connected.
The motor handpiece or the
motor handpiece cord is
damaged.
The contra-angle is clogged.
There is a short circuit inside
the motor handpiece or the
motor handpiece cord.
The contra-angle is clogged.
There is a short circuit inside
the motor handpiece or the
motor handpiece cord.
Solution
If the temperature of the
battery is less than 0°C
(32°F), the battery is not
rechargeable. Charge the
battery in a warm room. Be
careful about moisture
condensation.
It is normal that the battery
temperature is slightly
elevated right after
charging. If the battery is
hot during normal
operating conditions, it
may indicate an
abnormality. Contact your
distributor.
See chapter 8.
Solution
Check the connection.
Contact your distributor.
Clean or replace the
contra-angle.
Contact your distributor.
Clean or replace the
contra-angle.
Contact your distributor.
51/60