Displaying The Software Version - Dentsply Sirona X-Smart Plus User Manual

Step-by-Step Instructions
Turn the power off.
1.
Connect the AC adapter and check that the AC-IN lamp lights (see chapter
2.
6.5.1 Connecting the AC
Hold down the POWER key for more than 2 seconds, while pressing the
3.
REV key.
A sound appears for a length of time, and the refresh mode is activated. At
4.
this time, the CHRG lamp flashes slowly.
The battery is discharged and recharged automatically. This process will
5.
require approximately 10 hours.
Hold down the POWER key for more than 2 seconds if you want to stop this
6.
process.
NOTE
• This function is not activated unless the device is powered by the
AC adapter.
• This function is not required for each charging. This function
should be used if the operating time is shortened even if the
battery is relatively new.
• Do not repeat the battery refresh function in a short period of time.
It may result in enhancement of the memory effect.
• This function is an effective solution of the "memory effect"
phenomenon. However, it cannot be solved completely at one
time due to the battery characteristics. We recommend you to
repeat this process a few times.
6.10

Displaying the Software Version

Turn the power on and select a continuous rotary file system.
1.
Hold down the + and - TORQUE keys simultaneously for more than 2
2.
seconds.
36/60
adapter).
BENXSPSDFUWEB / Rev.09 / 10-2018