Dentsply Sirona X-Smart Plus User Manual page 15

Step-by-Step Instructions
8
9
10
11
12
13
14
BENXSPSDFUWEB / Rev.09 / 10-2018
REV
AUTO REV
CAL
MEMO
SOUND VOLUME
AC-IN LAMP
CHRG LAMP
Changes the rotational direction of the
file (only possible for continuous rotary
systems).The rotational direction can
also be changed while the file is in
motion.
Only for continuous rotary systems,
selects one of the 3 auto reverse
modes (see chapter
and Removing the
AUTO REVERSING: Automatic stop
and reverse motion followed by forward
rotation.
When preset torque is reached
AUTO STOP: Automatic stop and
reverse motion followed by stop when
the preset torque is reached.
AUTO REVERSE OFF: Auto reverse
mode is not activated.
Calibrates the contra-angle to ensure
torque accuracy each time the contra-
angle is replaced or lubricated (keep
pressed for more than 2 seconds).
Saves modifications to the speed,
torque limit values and auto (keep
pressed for more than 2 seconds).
Adjusts the sound volume.
Lights green when the control unit is
connected to the mains.
Lights or flashes orange while battery is
charging or in the refresh mode (see
chapter 6.9 Battery
error condition (see chapter
Code).
6.5.4 Inserting
File):
Refresh) and in an
8 Error
15/60