Installing The Handle; Power On Procedure - Chroma 62000H Series Operating & Programming Manual

Programmable DC Power Supply 62000H Series Operating & Programming Manual
62100H-450
62100H-600
62100H-1000
62150H-40
62150H-450
62150H-600
62150H-1000
1.
CAUTION
2.
2.5.4

Installing the Handle

Use M4X12 flat head screws to secure the handle to the rack mounting kit as shown in
Figure 2-9.
2.6

Power On Procedure

Plug in the power cord and turn on the power switch on front panel. The DC Power Supply
will run a series of self-tests. The VFD on the front panel will light up and show as below:
2-10
To ensure the system's stability, the capacitance should not exceed
the value listed in Table 2-3.
Be aware of the polarity and its withstand voltage when paralleling
capacitance.
Figure 2-9 Installing the Handle
2700
2700
1350
30000
4050
4050
1350