Measure Subsystem; Program Subsystem - Chroma 62000H Series Operating & Programming Manual

Programmable DC Power Supply 62000H Series Operating & Programming Manual

5.6.2.5 MEASURE Subsystem

1. MEASure:VOLTage?
Description:
Query Syntax:
Return Parameter: <NRf+> [Unit Voltage]
Query Example:
Return Example:
2. MEASure:CURRent?
Description:
Query Syntax:
Return Parameter: <NRf+> [Unit Amp]
Query Example:
Return Example:
3. MEASure:POWer?
Description:
Query Syntax:
Return Parameter: <NRf+> [Unit Amp]
Query Example:
Return Example:

5.6.2.6 PROGRAM Subsystem

1. PROGram: SELected
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NR1>
Query Example:
Return Example:
2. PROGram:LINK
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NR1>
Query Example:
Return Example:
5-20
BIT 14: Reserved
BIT 15: Reserved
<Arg2>: ON|OFF output status at present
<Arg3>: CV or CC status at present
It returns the voltage measured at the output of Power Supply.
MEASure:VOLTage?
MEAS:VOLT?
8.120000e+01
It returns the current measured at the output of Power Supply.
MEASure:CURRent?
MEAS:CURR?
3.150000e+01
It returns the power measured at the output of Power Supply.
MEASure:POWer?
MEAS:POW?
5.000000e+03
It sets the executed program no.
PROGram: SELected <NR1>
1 to 10
PROG:SEL 10
PROG:SEL? It returns the program no. in use.
PROG:SEL?
10
It links a program to another when ends.
PROGram:LINK <NR1>
0 to10 (0 is not linked)
PROG:LINK 7
PROG:LINK?
PROG:LINK?
7