Output/Indication; Input Control Signals; Measuring & Editing; Specifications - Chroma 62000H Series Operating & Programming Manual

Programmable DC Power Supply 62000H Series Operating & Programming Manual
1.2.3

Output/Indication

(1) Auxiliary power output (12Vdc/10mA).
(2) Analog monitors (V/I Monitor) the output signal instantaneously. This allows signals to
be easily monitored by external instruments (DMM, Oscilloscope, etc). Able to set the
output level indication (DC ON) signal.
(3) Output indicator (DC ON) signal.
(4) Protection state indication (OVP/OCP/OPP /FAN LOCK/AC FAULT, etc).
(5) Over temperature (OTP) protection signal.
(6) CV/CC status indicators.
(7) Output status indicators.
1.2.4

Input Control Signals

(1) Remote sense input for voltage drop compensation.
(2) Analog reference voltage (APG) input in which the setting of voltage and current can be
set by the voltage source, current source and resistance that adjusted for the panel
setting.
(3) Remote inhibit control signal (TTL)
1.2.5 Measuring & Editing
(1) Measurement for voltage, current and power.
(2) 10 programs and 100 sequences to edit voltage/current waveform output.
(3) One run time voltage program that can be set for long hour.
1.3

Specifications

Chroma 62000H Series High Power Density DC Power Supplies contain 5KW (62050H),
10KW (62100H) and 15KW (62150H) 3 models by the output power and the power supply of
each model has various output specifications. Table 1-1, Table 1-2 and Table 1-3 list the
output specifications of 62000H Series DC POWER SUPPLY 5KW, 10KW and 15KW. (It is
suggested to warm up 10 minutes or above before performing the test items. The test
condition is 25 ± 5°C and under resistance load.)
1-2