Calibration - Chroma 62000H Series Operating & Programming Manual

Programmable DC Power Supply 62000H Series Operating & Programming Manual
DEVICE MODEL
SERIAL NO.
FIRMWARE
VERSION
FPGA VERSION
MODULE VERSION ： Display the module version no. 00.00B,00.00B,00.00B as
3.3.7

CALIBRATION

Chroma 62000H Series DC Power Supplies have 5 calibration functions:
(1) VOLTAGE: the actual voltage output (CV mode) and its measurement accuracy.
(2) CURRENT: the measurement accuracy of current.
(3) CURRENT: the actual current out (CC mode).
(4) APG VOLTAGE: the actual voltage output and its accuracy of analog V Monitor under
analog voltage control mode.
(5) APG CURRENT: the actual current output and its accuracy of analog I Monitor under
analog current control mode.
Follow the procedure below to enter into calibration mode:
1. In CONFIG Setup page, press "
option as Figure 3-89 shows.
3-50
: Display the model no. 62150H-600 as Figure 3-88 shows.
: Display the serial no. 65535 as Figure 3-88 shows.
: Display firmware version 00.54 and the released date July
20, 2009 as Figure 3-88 shows.
： Display the FPGA version no. 00.00B,00.00B as Figure 3-88
shows.
Figure 3-88 shows.
Figure 3-88
7
" and press
Figure 3-89
ENTER to enter into CALIBRATION