Fetch Subsystem - Chroma 62000H Series Operating & Programming Manual

Return Parameter: <NRf+> [Unit = Volt]
Query Example:
Return Example:
Note: The output must be OFF for setting.

5.6.2.4 FETCH Subsystem

1. FETCh:VOLTage?
Description:
Query Syntax:
Return Parameter: <NRf+> [Unit Volt]
Query Example:
Return Example:
2. FETCh:CURRent?
Description:
current.
Query Syntax:
Return Parameter: <NRf+> [Unit Amp]
Query Example:
Return Example:
3. FETCh:POWer?
Description:
Query Syntax:
Return Parameter: <NRf+> [Unit Amp]
Query Example:
Return Example:
4. FETCh:STATus?
Description:
Query Syntax:
Return Parameter: <Arg1><,><Arg2><,><Arg3>
SOUR:DCON:FALL?
SOUR:DCON:RISE?
7.950000e+01
It measures the output of Power Supply and returns real time
voltage.
FETCh:VOLTage?
FETC:VOLT?
9.983100e+00
It measures the output of Power Supply and returns real time
FETCh:CURRent?
FETC:CURR?
2.000000e-04
It measures the output of Power Supply and returns real time power.
FETCh:POWer?
FETC:POW?
5.000000e+03
It returns the status code of Power Supply's state.
FETCh:STATus?
<Arg1>: return warning message 0~65535, 0: no warning, use
binary for the rest and identify the cause of error.
BIT 0: OVP
BIT 1: OCP
BIT 2: OPP
BIT 3: Remote Inhibit
BIT 4: OTP
BIT 5: FAN_LOCK
BIT 6: SENSE FAULT
BIT 7: SERIES FAULT
BIT 8: Reserved
BIT 9: AC FAULT
BIT 10: FOLD Back CV to CC
BIT 11: FOLD Back CC to CV
BIT 12: Reserved
BIT 13: Reserved
Remote Operation
It returns the setting.
5-19