Setting Current Slew Rate; Execution In List Mode; Running List Mode - Chroma 62000H Series Operating & Programming Manual

4.1.2.7 Setting Current Slew Rate

1. Use " ", "
(7) shows.
2. Use numeric keys
conversion slew rate.
3. Press " ENTER " to confirm.
4. Press " " to return to Program PAGE (Figure 4-3).
EXIT
See section 3.3.2.4 for detail description.
4.1.3

Execution in LIST MODE

When the sequences are finished for editing, press "
" " to abort it.
EXIT

4.1.3.1 Running LIST MODE

1. Press " " will prompt a confirmation page as Figure 4-15 shows.
ON/OFF
2. Press " " again to confirm the execution and go to the MAIN PAGE as Figure 4-16
ON/OFF
shows. To quit the execution, press "
S E Q S T A T U S =
P R G N O . = 1
" keys to move the cursor to the column to be set as Figure 4-8
~ or "Rotary" (
0 9
Figure 4-15
EXIT
A U T O
S E Q N O . = 1
Figure 4-16
) knob to set the SEQ current
" to start execution and press
ON/OFF
" will return to the standby MAIN PAGE.
T I M E = 0 0 0 : 0 0 : 20
C O U N T _ R E M A I N = 0
Program Sequence
0 . 0 W
4-15