Revision History
The following lists the additions, deletions and modifications in this manual at each revision.
Date
Version Revised Sections
Sep. 2009 1.0
Feb. 2010 1.1
May 2010 1.2
May 2011 1.3
Sep. 2012 1.4
Jul. 2013
1.5
Complete this manual.
Add standard voltage/current settings of some specifications for test
conditions.
Modifiy the followings:
–
The description in Note for specification.
–
The description, figure and pin assignments of the Analog
Interface signal connector on the rear panel.
–
The setting of BRIGHTNESS.
Modify Note and Caution in the section of "Specifications".
Update the following:
−
Value of Input Specification in "Other Specifications"section
−
Notice in "Checking the Package" section
−
Notice in "SERIES/PARALLEL" section
−
Notice in "Assembling Series/Parallel Communication Interface"
section
Add "D/D FAULT Protection" section in the chapter of "Manual
Operation"
Add 62100H-1000 and 62150H-1000 two models
Update the following:
"Specification" in the chapter of "Overview"
−
"Preparation for Use" section in the chapter of "Installation"
−
"Setting DC_ON" and "SERIES/PARALLEL" sections in the
−
chapter of "Manual Operation"
ix