Chroma 62000H Series Operating & Programming Manual page 155

Query Syntax:
Return Parameter: INF. Or <NRf+>[Unit Amp]
Query Example:
Return Example:
14. PROGram:SEQuence:TIME
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NR1>
Query Example:
Return Example:
15. PROGram:CLEAR
Description:
Syntax:
Example:
16. PROGram:ADD
Description:
Syntax:
Parameter:
Example:
Query Syntax:
Return Parameter: <NR1>
Query Example:
Return Example:
17. PROGram:MAX?
Description:
Syntax:
Parameter:
Example:
Return Example:
18. PROGram:SEQuence
Description:
Syntax:
Parameter:
Example:
PROGram:SEQuence:CURRent:SLEWINF DISABLE releases the
Slewrate INF and return to 1A/ms
PROGram:SEQuence:CURRent:SLEW?
PROGram:SEQuence:CURRent:SLEW?
INF.
It sets the sequence for the duration of time.
PROGram:SEQuence:TIME <NRf1>
0.005~15000 , 0 (0 means end)
PROG:SEQ:TIME 10
PROG:SEQ:TIME?
PROG:SEQ:TIME?
1.000000e+01
It clears the sequence.
PROGram:CLEAR
PROG:CLEAR
It adds a sequence.
PROGram:ADD <NR1>
1~100 (based on the remaining SEQUENCE no. for configuration)
PROG:ADD
PROGram:ADD?
PROGram:ADD?
85 – it indicates the remaining no. is 85.
It queries the sequence number of present program.
PROGram:MAX?
PROG:MAX?
2 means there are two sequences under the present program.
It sets the parameters of a single sequence.
PROGram:SEQuence
<arg1><,><arg2><,><arg3><,><arg4><,><arg5><,><arg6><,><arg7>
Arg1: Sequence TYPE (NR1 0:Auto, 1:Manual, 2:EXT.Trig, 3:Skip)
Arg2: Sequence Voltage (NRf+ unit: voltage)
Arg3: Sequence Voltage Slewrate (NRf+ unit: voltage)
Arg4: Sequence Current (NRf+ unit: current)
Arg5: Sequence Current Slewrate (NRf+ unit: current) / INF –I
Slewrate sets to INF
Arg6: Reserved (always 0)
Arg7: Sequence TIME (NRf+ unit: SEC, only valid when Sequence
Type is AUTO)
Set the Sequence
Remote Operation
It returns the settings.
5-23