Execution Of V_Step Mode; Running V_Step Mode - Chroma 62000H Series Operating & Programming Manual

START
10V
START
20V
10V
4.2.2

Execution of V_STEP MODE

After the setting is done, press "
press " ".
EXIT

4.2.2.1 Running V_STEP MODE

1. Press " " will appear a confirmation window as Figure 4-15 shows.
ON/OFF
2. Press " " one more time to confirm the execution. It will skip to the MAIN PAGE
ON/OFF
during execution as Figure 4-23 shows. To quit the execution, press "
to the MAIN PAGE window at standby.
Press "
Power Supply stops output.
10(MIN)
Figure 4-21
10(MIN)
Figure 4-22
ON/OFF " to confirm and start the execution. To abort it, just
" can interrupt the Program execution forcibly that is the
EXIT
Program Sequence
50V
50V
EXIT " can return
4-19