Setting Time; Setting Voltage; Setting Voltage Slew Rate; Setting Current - Chroma 62000H Series Operating & Programming Manual

Programmable DC Power Supply 62000H Series Operating & Programming Manual
4.1.2.3

Setting Time

1. Use " ", "
(3) shows.
2. Use numeric keys
This function is to set the time sustained. This setting TIME = only appears when SEQ.
TYPE = AUTO.
3. Press " " to confirm.
ENTER
4. Press " EXIT " to return to Program PAGE (Figure 4-3).

4.1.2.4 Setting Voltage

1. Use " ", "
(4) shows.
2. Use numeric keys
3. Press " " to confirm.
ENTER
4. Press " EXIT " to return to Program PAGE (Figure 4-3).
See section 3.2 for detail description.

4.1.2.5 Setting Voltage Slew Rate

1. Use " ", "
(5) shows.
2. Use numeric keys
conversion slew rate.
3. Press " ENTER " to confirm.
4. Press " " to return to Program PAGE (Figure 4-3).
EXIT
See section 3.3.2.3 for detail description.

4.1.2.6 Setting Current

1. Use " ", "
(6) shows.
2. Use numeric keys
limit.
3. Press " " to confirm.
ENTER
4. Press " " to return to Program PAGE (Figure 4-3).
EXIT
See section 3.2 for detail description.
4-14
" keys to move the cursor to the column to be set as Figure 4-8
~ or "Rotary" (
0 9
" keys to move the cursor to the column to be set as Figure 4-8
0 9
~ or "Rotary" (
" keys to move the cursor to the column to be set as Figure 4-8
0 9
~ or "Rotary" (
" keys to move the cursor to the column to be set as Figure 4-8
0 9
~ or "Rotary" (
) to set the value.
) knob to set the SEQ output voltage
) knob to set the SEQ voltage
) knob to set the SEQ output current