Overview; Introduction; System Functions; Operation Mode - Chroma 62000P Series Operating & Programming Manual

1.

Overview

1.1

Introduction

Chroma 62000P Series are constant DC Power Supplies that can provide stable DC output
and accurate measurement for voltage and current.
The features of 62000P Series DC Power Supply are:
(1) Voltage mode with two loops control
output, also to set the slew rate of output voltage and current.
(2) Constant power output
output voltage range (62012P-80-60: 80V-20V).
(3) 16-bit ADC/16-bit DAC
(4) Lower transient spike and transient response time
most stable output and the best protection under the circumstance of load variation
(5) Editing mode (Programming Mode) for output waveform
voltage and current combinations in time for long period test.
(6) Rotary knob and keyboard control on the front panel
current.
(7) Large LCD panel
(8) Via GPIB, RS-232C or APG (analog programmable interface) interface
control.
1.2

System Functions

1.2.1

Operation Mode

(1) Local operation is performed by the keyboard and rotary knob on the front panel.
(2) Remote control is done via GPIB or RS-232C interface.
(3) Through the APG input to control output via analog signal.
1.2.2

Protection

(1) Protections for over/under input voltage, over output voltage, over current current, over
power, over temperature, fan fail, CV/CC fold back and etc. are available.
(2) Free temperature control for fan speed.
1.2.3

Output/Indication

(1) The output terminals are on the front and rear panels.
(2) Auxiliary power output (12Vdc/10mA).
able to provide stable and quick responded
users are able to get rated power output within the maximum
provides excellent resolution.
gives users a complete operation state.
makes the unit under test gets the
provides multiple output
to set the output voltage and
Overview
to do remote
1-1