Execution Of V_Step Mode; Running V_Step Mode - Chroma 62020H-150S Operating & Programming Manual

START
10V
START
20V
10V
4.2.2

Execution of V_STEP MODE

Once all the sequences have been programmed, press "
EXIT
" " to stop execution.
4.2.2.1

Running V_STEP MODE

ON/OFF
1. Pressing "
ON/OFF
2. Press " " one more time to confirm the execution. The display will go to the MAIN
PAGE during execution as shown in Figure 4-23. To stop the execution, press "
to return to the MAIN PAGE screen.
Pressing "
Supply output.
Figure 4-21
Figure 4-22
" will display a confirmation window as shown in Figure 4-15.
EXIT
" will abort the executing program and shut off the Power
10(MIN)
10(MIN)
ON/OFF
Program Sequence
50V
50V
" to start execution. Press
EXIT
"
4-19