Replace Baffle - Maytag 30 Series Service Manual

Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the tub and spin basket assembly
(See page 4-39).
4. Pry 2 metal tabs up with a flat blade
screwdriver.
5. Slide the baffle to release the tabs from the
slots in the spin basket and remove it from
the spin basket.
nOTe: It is not necessary to remove the
spin basket from the tub when replacing
a broken baffle. Just break off the broken
baffle and remove all of the broken parts.
Make sure the pry tabs are lowered toward
the center of the spin basket. Slide the
new baffle into the slots in the spin basket
and slide the baffle until it locks into place
behind the pry tabs.

rePLaCe BaFFLe

4-42