Set-Up Codes - Maytag 30 Series Service Manual

n The DELICATES AND KNITS button will
advance from code to code.
The PERM. PRESS button will change the
n
code value.
n The QUICK CYCLE button will select or
deselect options.
FOR PR MODELS: The set-up codes are the
same as for the 'PD' models except where
noted.
The set-up code is indicated by the one or two
left-hand characters. The set-up code value
is indicated by the two or three right-hand
characters. NOTE: First code shown in each
section is default code for coin equipment.
NOTE: First code shown in each section is default code for coin equipment.
CODE
6 0 7 REGULAR CYCLE PRICE
6 0 7 Represents the number of quarters
may adjust from 0-39. (See VALUE OF COIN 1.) Advance from 0-39 by
pressing the PERM. PRESS key pad. Factory default of 7 quarters = $1.75.
6 00
PR MODELS ONLY: Factory default of 0 quarters
With coin slide activation, this represents the number of push-in
actuations of a coin slide to start the washer.
6 01 setting would represent one coin slide actuation.
NOTE: For coin slide activation, replacement of the meter case is necessary.
� Press the DELICATES AND KNITS key pad once to advance to next code.

SeT-uP CODeS

EXPLANATION
(coin 1) needed to start the washer
(coin 1) .
CODE
7 1 1 WASH LENGTH
7 1 1
This is the number of minutes for WASH. Washer comes from the
factory preset with 11 minutes. Choose from 9-17 minutes by
pressing the PERM. PRESS key pad. Wash time does not include
fill time.
� Press the DELICATES AND KNITS key pad once to advance to next code.
8 0 0
ADDITIONAL RINSE OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
8 0 0
Not Selected 'OFF'.
8 A 8
Selected 'ON'. Cannot be combined with the Super Cycle rinse option.
Press the QUICK CYCLE key pad once for this selection.
� Press the DELICATES AND KNITS key pad once to advance to next code.
CYCLE COUNTER OPTION
9 0 0
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
9 0 0
Not Selected 'OFF'.
9 0 C
Selected 'ON' and not able to be deselected.
Press the QUICK CYCLE key pad 3 consecutive times to select
'ON'. Once selected 'ON' it cannot be deselected.
� Press the DELICATES AND KNITS key pad once to advance to next code.
1. 0 0
MONEY COUNTER OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
1. 0 0
Not Selected 'OFF'.
1. 0 C
Selected 'ON'.
Press the QUICK CYCLE key pad 3 consecutive times
to select 'ON' and 3 consecutive times to deselect (Not
;
Selected 'OFF'.) Counter resets by going from 'OFF' to 'ON'.
1. C 0
Selected 'ON' and not able to be deselected.
To select 'ON' and not able to be deselected, first select 'ON',
then within two seconds press the QUICK CYCLE key pad twice,
the PERM. PRESS key pad once, and exit the set-up mode.
� Press the DELICATES AND KNITS key pad once to advance to next code.
2. 0 0
SPECIAL PRICING OPTION
This option is either SELECTED 'ON' or NOT SELECTED 'OFF'.
2. 0 0 Not Selected 'OFF', and next available code will be A.00.
2. S P
Selected 'ON'. Press the QUICK CYCLE key pad once
for this selection.
If SPECIAL PRICING OPTION is selected, you have access to codes '3.XX'
through '9.XX'.
� Press the DELICATES AND KNITS key pad once to advance to next code.
OPTIONS TO USE IF SPECIAL PRICING IS SELECTED:
3. 0 7 SPECIAL CYCLE PRICE
3. 0 7
Represents the number of quarters (coin 1) to start a cycle:
may adjust from 0-39. (See VALUE OF COIN 1.) Advance from
0-39 by pressing the PERM. PRESS key pad. Factory default
of 7 quarters = $1.75.
3. 00 PR MODELS ONLY: Factory default of 0 quarters.
� Press the DELICATES AND KNITS key pad once to advance to next code.
3-6
EXPLANATION