Maytag 30 Series Service Manual page 53

4. Use a flat blade screwdriver to press in on
the 2 locking tabs in the bottom slots to
release the switch.
Locking Tabs
5. Slide the switch up and pull it out of the slots
to remove it.
6. Remove the 2 wires from the clips on each
side of the ground switch and pull the
connectors off the spade terminals.
Wire Clips
Wire Connectors
7. Push out on the 2 tabs of the switch holder,
rotate the switch in the direction of the
arrow, and remove the switch from the
holder.
4-27
Ground Switch
Switch Holder
Locking Tabs
Ground Switch