Ccu Wire Harness Connector Table - Maytag 30 Series Service Manual

CCU WIRE HARNESS
CONNECTOR TABLE
CCu Wire HarneSS
COnneCTOr TaBLe
Unplug washer or disconnect power
before taking ohm measurements
Unplug washer or disconnect power
before taking ohm measurements
* The number 1 pin has been marked
on the locking part of the connector.
**An infinity measurement occurs when the
multimeter does not detect an ohm reading,
which indicates an open switch or circuit.
3, 4
4, 6
4, 5
4, 6
6-14
6-14