Drain System - Maytag 30 Series Service Manual

The washer can be installed using the
standpipe drain system (floor or wall), the
laundry tub drain system, or the floor drain
system. Select the drain hose installation
method needed.
Standpipe drain system: wall or floor
(Views A & B)
The standpipe drain requires a minimum
diameter standpipe of 2" (50 mm). The
minimum carry-away capacity can be no less
than 10 gal. (38 L) per minute.
The top of the standpipe must be at least 30"
(762 mm) high and no higher than 96" (2.4 m)
from the bottom of the washer. A drain hose
extension must be added to reach maximum
drain height capability.
(762 mm)
A

Drain SYSTeM

30" min.
B
Laundry tub drain system (view C)
Laundry tub needs a minimum 20 gal. (76 L)
capacity. The top of the laundry tub must be
at least 30" (762 mm) above the floor.
Floor drain system (view D)
The floor drain system requires a siphon break
that may be purchased separately.
The siphon break must be a minimum of 28"
(710 mm) from the bottom of the washer.
Additional hoses might be needed.
C
2-4
Siphon Break
(Anti-Siphon Device)
28" min.
30" min.
(710 mm)
(762 mm)
D