rePLaCe CONTrOL
PaNeL - MN MODeL
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Remove the control panel (see page 4-1).
2.
Remove the timer knob (see page 4-3).
3.
Remove the escutcheon (see page 4-3).
4.
Remove the controls (see page 4-4).
5.
Remove the ground wire clip.
Ground
wire clip
6.
Replace the control panel.
4-5