Maytag 30 Series Service Manual page 46

8. To remove the door hinge, remove three
T-20 machine screws that secure the hinge
to the inner door panel. The hinge is also
used to hold part of the inner door panel and
must be removed to replace the bowl.
nOTe: The door hinge is secured with
machine screws, and the door halves are
secured with screws for plastic. These
screws must not be interchanged.
9. To remove the bowl, remove the hinge and
remove three T-20 screws from each of the
other 2 brackets secured to the inner door
panel. These screws also have threads for
plastic but are shorter than the screws that
secure the door halves together.
10. Support the inner door trim to avoid having
it drop when removing the bowl brackets.
4-20