6 . DSC 4000 Installation and Hardware Guide
Pyris Installation
NOTE: If you are going to install multiple analyzers, or just want to install a universal serial
Install Multiple Analyzers
bus, see
This user's guide gives information on the installation of your PerkinElmer Thermal Analysis
System, and details about the operation and maintenance of the hardware. This information
can also be found in the Pyris Installation and Hardware Help provided with your Pyris
software.
Information on the operation of the Pyris software can be found in the software Help.
In general, the installation procedure consists of the following steps:
Prepare the laboratory
•
Unpack the thermal analysis system
•
•
Set up the required system components (for example, purge gases, cooling supply, and
analyzer-specific items)
•
Connect the system components
Configure the analyzer
•
Calibrate the analyzer
•
before you begin to install an analyzer.