Installation - PerkinElmer Lambda 365 Installation Instructions Manual

- Used to fix a cell holder, a base plate or a front plate for Lambda 365.
- Spare screws (2ea) are enveloped with the accessory.
Figure 4 Phillips round head screw with washer (M4 *12L)
I nstallation
Make sure the instrument is turned off while installing this accessory.
CAUTION
ATTENTION Assurez-vous que l'instrument est éteint lors de l'installation de cet
accessoire.
1. Prepare the Lambda 365 Spectrophotometer to install this accessory.
2. Connect the power cord and the communication cable. DO NOT turn on the power of the
instrument!
Figure 5 Connecting the power cord and USB communication cable
3. Remove the two Phillips round head screws with washer (M4*12L) to remove the existing cell
holder and base plate.
Figure 6 Location of the two Phillips round head screws with washer
4
09931462A